Billco PLC Semi Automatic I.G. Line

Video Billco PLC semi automatic IG line

Video 2 Billco PLC semi automatic IG line

Manufacture: Billco

Type: High production, dual assembly line, PLC driven semi automtic IG line set up for Duraseal/duralite spacer.

Date of manufacture: 1993

Voltage: 460 volts, 3 phase

Footprint size: Takes up 100 feet in Length x 25 feet wide ( 2,500 sq ft )

Condition: Very Good-New set of for Low E recently installed. New Allen Bradley SLC 5/03 CPU recently installed. Stainless steel water delivery tubes.

Location: Wisconsin

Consisting of the following pieces of equipment:-

(1) Bilco Infeed Conveyor Table

103″ wide x 101″ long x 35-1/2″ pass line height infeed table
Right and left hand work zones
Each table zone powered by (1) 3/4 hp drive motor
3/4″ wide rubber table conveyor rollers
S/N W093123-5

Billco 96″ Wide Capacity Feed Through Glass Washer
96″ wide max capacity
Two washing stations
Three pairs of air knives
Side mounted 25 hp, 230/460 volt three phase vacuum blower
Freestanding operator control station
3697 hours on meter
S/N W093122-0

3 x Billco PLC Transfer Conveyor Tables
102″ wide x 102″ long x 35-1/2″ high conveyor tables
Rubber conveyor rollers
Top and side dust shield guards
3/4 hp conveyor drives
Conveyor has right and left hand work zones
Free standing operator PLC control station
Allen bradley PLC controller

1 x Bilco Cross Feed Transfer Conveyor Table
102″ wide x 102″ long x 35-1/2″ high
Top dust and safety guards
Popup rubber wheel cross feed type conveyor rollers

1 x Right Hand Spacer Application Table
96″ wide x 96″ long x 35-1/2″ high
phenolic vacuum grid work table
2 hp 460 volt three phase blower
front pneumatic popup table location pins
foot pedal controls
S/N W093123-10

1 x Right Hand Muntin Grill Bar Insertion Table
72″ wide x 108″ long x 35-1/2″ high
Vacuum air float table with grid type table top
Side and end mounted popup location pins
2 hp, 230/460 volt three phase blower motor
(3) table mounted popup transfer conveyor belts
1/2 hp conveyor drive motor
1/2″ diameter rubber conveyor belts

1 x Right Hand Automatic IG Topper Assembly Station
72″ wide x 96″ long max IG panel capacity
Top vacuum head for applying top glass to panel
Bottom cross feed conveyor table
Freestanding vacuum blower and safety enclosure
Approx 30 hp blower drive motor
S/N W093123-13

1 x Left Hand Spacer Application Table
96″ wide x 96″ long x 35-1/2″ high
Phenolic vacuum grid work table
2 hp 460 volt three phase blower
Front pneumatic popup table location pins
Foot pedal controls
S/N W093123-11

1 x Left Hand Muntin Grill Bar Insertion Table

72″ wide x 108″ long x 35-1/2″ high
Vacuum air float table with grid type table top
Side and end mounted popup location pins
2 hp, 230/460 volt three phase blower motor
(3) table mounted popup transfer conveyor belts
1/2 hp conveyor drive motor
1/2″ diameter rubber conveyor belts

1 x Right Hand Automatic IG Topper Assembly Station

72″ wide x 96″ long max IG panel capacity
Top vacuum head for applying top glass to panel
Bottom cross feed conveyor table
Freestanding vacuum blower and safety enclosure
Approx 30 hp blower drive motor
S/N W093123-12

1 x Billco Center Mounted Cross Transfer Conveyor Table
102″ wide x 102″ long x 35-1/2″ high

1 x Billco Center Mounted Transfer Conveyor Table
102″ wide x 72″ long x 35-1/2″ high

1 x Billco Heated Roller Oven Press
90″ wide max capacity
Heated infeed section with (5) roller press outfeed
S/N W093123-16

1 x Billco Roller Skate Top Conveyor Table
86″ wide x 49″ long x 35-1/2″ high

1 x Free Standing Master Operator Control Station

1 x Square D 25 kva power transformer
240/480 high volts, 120/240 low volts

Notes:

Would consider breaking up the line into the following groups;-

Glass washer and some conveyors

Heated roller press & assembly tables

Conveyors

[one_third]

[/one_third]